Auger Bucket
Lease for $125/mth
Featured Products
Weatherstripping for Garage Doors (PVC Rubber Weather-seal / Trim)
OHD WS-16
NO FINE PRINT WE KEEP THIS SIMPLE, PERIOD!YES 100%, We Sell & Service all Door Types! Derkson Garage Door Perimeter Weatherstripping for Garage Doors (PVC Rubber Weather-seal / Trim)OHD WS-16 $99.00 Per Strip + $150 Installation Services Colour Options:* White* Desert Tan* Sandstone* Chocolate* Gray * Charcoal* Black DESCRIPTION:NEED A HAND WITH INSTALLATION?Creating a water and wind-repelling seal between your garage door and door jambs, this easy to install seal helps keep out the elements along with dirt, insects and pests. The PVC and flexible rubber combination is a great way to not only seal your garage door, but frame it nicely too.These weather seals are sold in 16ft pieces, with 2 pieces typically providing the correct fit for a standard sized double-car garage door.What are the benefits of PVC weatherstripping / weatherseal for garage doors?They won’t rustThey provide one uniform colour throughoutThey’re easily cut to exact lengthThey’re easily transported and will bend to fit into most trucks/SUVsThey’re available in a wide range of coloursBase Measurement: 2" Wide Fin Measurement: 1-1/4" WideNote: Black PVC Weatherstrip varies slightly in style and measurements (base measurement: 1-7/8" wide & fin measurement: 1" wide).NOTE: AVAILABLE FOR PICK UP ONLY! We do not ship this weatherstripping, as it does not ship economically. Fasteners are not included in this weatherstripping kit.Need A Hand With Installation?We can help! Call us at (306) 525-2585, email us at [email protected], or visit our services page to learn more.
$99.95
OHD WS-16
NO FINE PRINT WE KEEP THIS SIMPLE, PERIOD!YES 100%, We Sell & Service all Door Types! Derkson Garage Door Perimeter Weatherstripping for Garage Doors (PVC Rubber Weather-seal / Trim)OHD WS-16 $99.00 Per Strip + $150 Installation Services Colour Options:* White* Desert Tan* Sandstone* Chocolate* Gray * Charcoal* Black DESCRIPTION:NEED A HAND WITH INSTALLATION?Creating a water and wind-repelling seal between your garage door and door jambs, this easy to install seal helps keep out the elements along with dirt, insects and pests. The PVC and flexible rubber combination is a great way to not only seal your garage door, but frame it nicely too.These weather seals are sold in 16ft pieces, with 2 pieces typically providing the correct fit for a standard sized double-car garage door.What are the benefits of PVC weatherstripping / weatherseal for garage doors?They won’t rustThey provide one uniform colour throughoutThey’re easily cut to exact lengthThey’re easily transported and will bend to fit into most trucks/SUVsThey’re available in a wide range of coloursBase Measurement: 2" Wide Fin Measurement: 1-1/4" WideNote: Black PVC Weatherstrip varies slightly in style and measurements (base measurement: 1-7/8" wide & fin measurement: 1" wide).NOTE: AVAILABLE FOR PICK UP ONLY! We do not ship this weatherstripping, as it does not ship economically. Fasteners are not included in this weatherstripping kit.Need A Hand With Installation?We can help! Call us at (306) 525-2585, email us at [email protected], or visit our services page to learn more.
$99.95
Colour Pre Season Booking Event
So Many Colours to Choose from, Dont delay book early to avoid seasonal increases & guarentee your May install now. lets discuss your project today, book completly online and we will give you a $50 Credit. Pre-qualification won't affect your credit score Finance your Project, get Pre approved now before Rates Climb again, Lock in 4.99% over 36 or 5.99% over 48 Months Average Contract for $10,000 Bi-weekly payment $39.36Purchase amount $10,000.00Amortization period 180 monthsAdministration fee $399
So Many Colours to Choose from, Dont delay book early to avoid seasonal increases & guarentee your May install now. lets discuss your project today, book completly online and we will give you a $50 Credit. Pre-qualification won't affect your credit score Finance your Project, get Pre approved now before Rates Climb again, Lock in 4.99% over 36 or 5.99% over 48 Months Average Contract for $10,000 Bi-weekly payment $39.36Purchase amount $10,000.00Amortization period 180 monthsAdministration fee $399
Springs
DESCRIPTIONDerkson Garage Door offers a range of garage door torsion springs to replace broken or worn out springs in an existing door assembly. Pricing here is on our the most common residential springs. Typically Torsion Springs are needed and replaced in pairs (especially on double car doors). Note: All sales on Torsion Springs are a FINAL. Note: Springs outside of these measurements would require a quick quotation, so if you’re looking for more information, please call us at (403) 366-7911. All Springs are rated for an industry standard minimum lifecycle of 10,000 cycles Left and Right Hand Wound Springs available - Select the option needed belowSprings come with winding and stationary cones installed Coated & oil tempered wire While we recommend torsion spring replacement be left to Derkson Garage door professional installers, you can replace the spring(s) yourself with the right tools, technical expertise, and a bit of elbow grease. BEST PRACTICE: It is certainly best practice to change both/all springs above a door when one has been compromised or has broken. The reasoning behind this is that all of the springs have performed the same amount of work (same open/close cycles) that the damaged spring has and are most likely close to breaking down themselves. Moreover, it is dangerous to wind an old spring. TIPS: A few tips to keep in mind: Before ordering, measure your broken spring(s) wire gauge, inner diameter, and overall length (coils only) when in a relaxed (unwound) state.Our springs have a 2" Inner Diameter (if perhaps your springs have an inner diameter of 1 3/4", please use our "How to Measure Your Replacement Torsion Springs" to help you determine the correct replacement springs. Replacement spring(s) must match broken spring(s) measurements or be converted to mathematical equivalents.Winding rods are highly recommended and available for purchase, although we strongly recommend that torsion springs be professionally installed for safe operation and longevity of product. How to Select Your Replacement Garage Door Springs Measure 20 coils to determine spring wire gauge (see the guide in the product images above)Measure the internal diameter of the coil (from inside to inside of coil)Measure end of coil to end of coil length on an unwound/relaxed spring (not including the end cones) to determine correct replacement spring length (keep in mind that the spring length can be off marginally and the door should still balance nicely)Reference our "How to Measure Your Replacement Torsion Springs" for further clarification.Contact us at any time if you need further assistance or information about your torsion springs, or if you’d to have them professionally replaced by our experienced technicians. Please kindly remember all sales on torsion springs are a final sale.
DESCRIPTIONDerkson Garage Door offers a range of garage door torsion springs to replace broken or worn out springs in an existing door assembly. Pricing here is on our the most common residential springs. Typically Torsion Springs are needed and replaced in pairs (especially on double car doors). Note: All sales on Torsion Springs are a FINAL. Note: Springs outside of these measurements would require a quick quotation, so if you’re looking for more information, please call us at (403) 366-7911. All Springs are rated for an industry standard minimum lifecycle of 10,000 cycles Left and Right Hand Wound Springs available - Select the option needed belowSprings come with winding and stationary cones installed Coated & oil tempered wire While we recommend torsion spring replacement be left to Derkson Garage door professional installers, you can replace the spring(s) yourself with the right tools, technical expertise, and a bit of elbow grease. BEST PRACTICE: It is certainly best practice to change both/all springs above a door when one has been compromised or has broken. The reasoning behind this is that all of the springs have performed the same amount of work (same open/close cycles) that the damaged spring has and are most likely close to breaking down themselves. Moreover, it is dangerous to wind an old spring. TIPS: A few tips to keep in mind: Before ordering, measure your broken spring(s) wire gauge, inner diameter, and overall length (coils only) when in a relaxed (unwound) state.Our springs have a 2" Inner Diameter (if perhaps your springs have an inner diameter of 1 3/4", please use our "How to Measure Your Replacement Torsion Springs" to help you determine the correct replacement springs. Replacement spring(s) must match broken spring(s) measurements or be converted to mathematical equivalents.Winding rods are highly recommended and available for purchase, although we strongly recommend that torsion springs be professionally installed for safe operation and longevity of product. How to Select Your Replacement Garage Door Springs Measure 20 coils to determine spring wire gauge (see the guide in the product images above)Measure the internal diameter of the coil (from inside to inside of coil)Measure end of coil to end of coil length on an unwound/relaxed spring (not including the end cones) to determine correct replacement spring length (keep in mind that the spring length can be off marginally and the door should still balance nicely)Reference our "How to Measure Your Replacement Torsion Springs" for further clarification.Contact us at any time if you need further assistance or information about your torsion springs, or if you’d to have them professionally replaced by our experienced technicians. Please kindly remember all sales on torsion springs are a final sale.
